Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 1, 2021 15:44:03 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 1, 2021 15:49:11 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 1, 2021 16:13:32 GMT
|
|
|
Post by starfighter on Aug 1, 2021 20:33:37 GMT
|
|
leond
Conductor
leond
Posts: 201
|
Post by leond on Aug 2, 2021 13:40:00 GMT
Could you please post one of your layouts
Thanks
Leon D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 2, 2021 16:07:03 GMT
Could you please post one of your layouts How do I do that? But do I have to remove all models and trains first? Not everyone will have all of my models, then the layout won't load. But I must replace the locomotives with a model because all trains have an ID number. This controls the process via the track contacts. The three small systems are stopped or started with just one signal, after which all trains run automatically. And then you have to pay attention to the train length. On some routes only just short trains (6 to 8 cars) fit, on other routes up to 20 cars ... on one layout.
|
|
leond
Conductor
leond
Posts: 201
|
Post by leond on Aug 2, 2021 20:44:18 GMT
Zip the ROA file Then post the zip file.
I will sort out the issues, add missing models. etc.
Leon D
|
|
|
Post by starfighter on Aug 3, 2021 2:42:36 GMT
Zip the ROA file Then post the zip file.
I will sort out the issues, add missing models. etc.
Leon D
That's nonsense, Pferdle's right! The Roa file is not enough, Pferdle would have to release the entire folder of his RTR to download! Without x, xli, texture files, and other layouts (.roa) in RTR, you won't run and you won't know what models it has installed from the .roa file. A layout file (.roa) can only be shared if the layout contains only models from the base package, or if you already have all the models that the Pferdle layout contains installed in your RTR!!!
|
|
|
Post by boots127 on Aug 3, 2021 10:16:32 GMT
5 nice layouts. Very much nice details! - Boots127
|
|
leond
Conductor
leond
Posts: 201
|
Post by leond on Aug 3, 2021 21:17:31 GMT
I agree the ROA file is not enough. I have correctly made several layouts from just the ROA file. I still would like the just one of the ROA files.
Thanks
Leon D
|
|
|
Post by boots127 on Aug 4, 2021 14:35:53 GMT
Pferdle, are u going to make a layout with trams? -Boots127
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 4, 2021 16:56:58 GMT
Sometimes I sorted vehicles into completely different xli files and assigned a completely different ID. Nothing matches the original downloads anymore. There are also vehicles that nobody owns, I've never offered them for download. I'll swap my vehicles for one standard locomotive, two different long freight cars and a passenger car. To be on the safe side, I'll include the files in case someone has deleted them. All other models must still have the original ID. I finish a roa with all models and a roa without models (only trains).
Not really. So far, I haven't used the trams. Maybe later.
|
|
|
Post by boots127 on Aug 5, 2021 12:51:47 GMT
Sometimes I sorted vehicles into completely different xli files and assigned a completely different ID. Nothing matches the original downloads anymore. There are also vehicles that nobody owns, I've never offered them for download. I'll swap my vehicles for one standard locomotive, two different long freight cars and a passenger car. To be on the safe side, I'll include the files in case someone has deleted them. All other models must still have the original ID. I finish a roa with all models and a roa without models (only trains). Not really. So far, I haven't used the trams. Maybe later. I tried some 10 years ago. Just a dogbone sling, the curves are too wide. But with new trams I'll try again later. - Boots127
|
|
|
Post by starfighter on Aug 6, 2021 3:01:58 GMT
|
|
|
Post by boots127 on Aug 6, 2021 14:41:28 GMT
Thnx Star!
|
|